This is the most technically advanced LED bulb you can buy!
Thermal “Air Flux Cooling” naturally draws heat out and away from the housing ~ no fans.
Billet aluminum spacers for superior heat transfer from bulb to heat sink unlike rubber oil seals our competitors use.
Phillips ZES LED’s were designed exclusively for automotive LED headlight applications.
Light point sources are identical to a standard H7 bulb for a full reflector engagement.
Same bulb for either high or low beam (same as OEM). The Pitch angle is completely adjustable.
Natural silver color blends into your headlight housing. Dark anodized finishes will fade and turn colors unlike ours.
Constant current power regulator in a separate housing makes the bulb no larger than stock.
Zero noise is induced into the audio system. Will not affect CB operation or require higher squelch settings.
No trimming of the rubber boot is required.
One kit includes 2 each of the following; bulbs, power regulation units, and spacers.
Element specifications (per element):
6063 Aircraft aluminum construction.
6000k color rendering.
360 degree light beam angle.
24 watt per bulb.
2.0amp (+/- .2) power draw. Stock halogen is 4.58amp.
H4 connector for full plug and play operation.
The comparison pics were produced in a GL1800 headlight housing, with only one side being shown.
10′ between the markers and 50′ from the light source to the roll-up door.
Your light will be double.
Note: the light point comparison pic below is of an H4 bulb, not the H7.