Cicada CXX Series 4.5″ Pincushion Speaker Kit

$389.99

Compare

Description

Note:  this is for a preorder as Cicada is receiving their product this week.

Cicada listened and produced!  From their legendary CXX series, you can now drop in without any mods or adapters.  See below for full fitment.

What OHM rating should you consider?
We HIGHLY suggest installing the 2-ohm version on all stock radios.  The slight decrease in resistance will work without any issues, and you should get a small increase in volume as well!
A 4-ohm load is suggested only if recommended by your aftermarket amplifier.

Do I need an amp?
No, but it’s truly difficult to get better sound when only upgrading speakers.  However, we all have different expectations.  My suggestion is to swap speakers first, ride, then decide if you truly need an amp.  Remember, the speakers on your bike were made by the lowest bidder….

Looking for the Ultimate Upgrade?
Go to 6.5″ Cicadas in the front of the 2018+ with our bolt-in Power Pods and the Cicada CXX4 series in the rear for a 100% bolt-in, no modifications required!

  • Designed for Honda® factory-designed locations
  • V8™ Dispersion Guide. Exclusive Cicada Design for 360 ° sound from the tweeter
  • Rain or Shine™ all-weather performance design
  • PEI tweeter dome for best sound dispersion.  Moisture-resistant, brighter sound, and more efficiency.  Built-In 6dB crossover
  • Kevlar cone -extremely lightweight, strong, moisture-resistant, and maximizes efficiency
  • Copper wire voice coils offer great sound while generating less heat
  • Neo Magnets
  • High temperature resistant Polycarbonate custom tooled basket
  • UV protection over all surfaces
  • Two (2) year warranty
  • 4.5-inch pincusion basket high-performance coaxial driver
  • Power Handling: 100W RMS / 200W MAX
  • Voice Coils: 1.2-inch (mm) Mid-bass / 0.75-inch (mm) Tweeter
  • Cone Material: Kevlar
  • Tweeter Dome: PEI
  • Magnet Type: Neodymium (N45H)
  • Sensitivity: 91 dB
  • Frequency Response: 100 Hz – 20 kHz (±3 dB)
  • Mounting Depth: 2.1 inches (54 mm)
  • Mounting Diameter: 3.8 inches (99 mm)

Fitment:
2018+ Goldwing – front and rear (rear requires Honda Accessory Installation Kit – available from your favorite dealer)
2018+ Goldwing Tour – front and rear
2006-2017 – rear
2001-2005 – front and rear (rear will require our 03110 Rear Speaker Harness)

Additional information

Weight N/A

You may also like…