With so many manufacturers offering lighting, but no common plug type, we developed a line of products to make the installation simple and safe.<\/p>\n
The EZ Light Distribution Block takes the output from your isolator and divides it up into easy plug & play use.
\nAvailable with or without the EC isolator & Sub-Harness.\u00a0 The connector on the isolator is added when ordered in the combination kit.
\nExpandable with five outputs featuring screwed-in terminals.\u00a0 Gives you incredible flexibility in adding extra lighting.
\nFuse protection can be custom-tailored to your actual load – other manufacturers offer no ability to properly set the load safety point with their ‘accessory hub’.
\nOther companies don’t give you an effective way to split the power from their outputs.\u00a0 All you get are wires you have to crimp yourself.\u00a0 No wiring knowledge is needed here!
\nSince the block is powered by an isolator, you can easily power your trailer lights off the unit as well (5 wire trailers).
\nWater and dust proof design with silicone covers to protect unused expansion ports.
\n3 3\/4″ long, 1 1\/2″ wide, and 5\/8″ tall (unpopulated).<\/p>\n
Multiple wire connectors are available to power any combination of lighting.\u00a0 Two plug-in terminal blocks are included with the distribution block for use with your wires.
\nChoose our 07502 – 2018+ Goldwing\/Tour Tail Light Connections if you already have a competitor’s wire harness.\u00a0 Remove it from your bike’s tail light connector and plug it into this.<\/p>\n
Choose our 07501 – EC Micro Connector 4 Way Splitter for all EC branded lighting products, or add our adapters to convert any EC connector to Goldstrike, Kuryakyn, or SoCalMotoGear light.
\nThis option makes it super easy to plug & play from ALL the manufacturers!<\/p>\n